Air Cooled Chiller 30XA

30XA AQUAFORCE®

Outdoor, Air-Cooled Liquid Chiller
with R-134a Refrigerant

80 to 500 Nominal Tons

AquaForce 30XA chillers were designed from the ground up to meet the efficiency demands of today and the future by providing premium air-cooled chiller packages for contractors, consulting engineers and building owners. Value-added features include rotary screw compression, R-134a HFC refrigerant, a quiet AeroAcoustic™ fan system, easy to use ComfortLink™ controls, microchannel condenser coil technology, and an optional integrated hydronic pump package with or without VFD.

Performance Features

  • Full-load EER values up to 10.9
  • IPLV values up to 15.4
  • ASHRAE 90.1 compliant
  • AHRI certified
  • Easy to use controls
  • Low sound levels
  • AeroAcoustic fan system
  • Operation from -20 F to 125 F ambient conditions
  • High-efficiency screw compressors
  • Novation® microchannel heat exchanger (MCHX) condenser coils
  • E-coated Novation microchannel heat exchanger (MCHX) condenser coils (factory-installed option)
  • Hydronic pump package, available with or without VFD on sizes 090-160 (factory-installed option)
  • Energy Management Module minimizes chiller energy consumption (factory-installed option or field-installed accessory)
  • Non-fused disconnect switch (factory-installed option)
  • Minimum load control (factory-installed option, field-installed accessory)
  • Low ambient head pressure control (factory-installed option or field-installed accessory)
  • Wye-delta starter available (factory-installed option)
  • ComfortLink™ controls with Touch Pilot™ or Navigator™ display
  • BACnet* Communication (factory-installed option) or BACnet and LON translator control (factory-installed option or field-installed accessory)
  • EXV (Electronic Expansion Valve)
  • DX Cooler (factory-installed option)

Reliability Features

  • ASME constructed evaporators
  • ETL (and ETL Canada) listed
  • Manufacturing facility registered to ISO 9001 manufacturing quality standard
  • Minimum of 2 independent refrigerant circuits
  • Factory full-load run tested
  • Heavy-gage galvanized steel frame
  • Security grilles (factory-installed option or field-installed accessory)
  • Hail guards/Privacy screen choices (factory-installed option or field-installed accessory)
  • Low ambient head pressure control (factory-installed option or field-installed accessory)
  • E-coated MCHX coil protection (factory-installed option)
  • Redundant pump with VFD-compatible motor available with hydronic pump package (sizes 090-160; factory-installed option)
  • Coil corrosion coatings available on all coil types (factory-installed option)
  • High short circuit current rating (factory-installed option)
  • EXV (Electronic Expansion Valve)

Maintenance Features

  • Over 15 diagnostic functions
  • Permanently lubricated fan motor bearings
  • Compressor suction service valves (factory-installed option)
  • Microchannel condenser coils with inherent corrosion resistance and offering simplified cleaning (factory-installed option)
  • Unit-mounted, non-fused disconnect (factory-installed option)
  • Remote service port for easier machine diagnostics (factory-installed option or field-installed accessory)

Installation Features

  • Factory charged with R-134a refrigerant
  • All-in-one package
  • Integrated hydronic pump package with or without VFD (sizes 090-160; factory-installed option)
  • GFI (ground fault interrupter) convenience outlet (factory-installed option or field-installed accessory)
  • Remote cooler kit (field-installed accessory)
  • Single or dual-point electrical connections available (factory-installed option)
  • Control transformer (factory-installed option)
  • Structurally robust base
  • Circuit setter provided with optional pump package (factory-installed option)

Standard Warranty

  • One year from start-up or 18 months from shipment limited warranty
  • 3-year coil parts warranty on Novation microchannel heat exchanger
  • Extended warranty packages available
Factory-Installed Options
Service optionCondenser coil trim panelsFull end screen
Hydronic pump package with or without VFD (sizes 090-160)
Condenser coil options:
  • Copper fins:
    • Non-coated
    • E-coated
  • Aluminum fins:
    • Non-coated
    • Pre-coated
    • E-coated
  • Microchannel heat exchanger
    • Non-coated
    • E-coated
Non-fused disconnect
Security grilles
Energy Management Module
Compressor sound reduction enclosures
Compressor suction service valve
Condenser coil upper hail guards
BACnet™ communication
BACnet™ translator control
LON (local operating network) translator control
Low ambient temperature head pressure control
Single or dual-point electrical connection
High ambient temperature option
Touch Pilot™ display
Navigator™ display
DX cooler
Minus-one-pass cooler (flooded cooler only)
Plus-one-pass cooler (flooded cooler only)
Control transformer
Wye-delta compressor start
Suction line insulation
High short circuit current rating (factory-installed option)
Minimum load control
Field-Installed Accessories

 

Minimum load control
Security grilles
Condenser coil full hail guards
Navigator™ display
Remote enhanced display
Chillervisor System Manager III multi-unit control
GFI convenience outlet
Energy Management Module
Touch Pilot™ display
LON (local operating network) translator control
BACnet™ translator control
Remote service port
Remote cooler
Condenser coil trim panels
Low ambient temperature head pressure control
External pump control
Dual-chiller accessory kit

United Kingdom Bookmaker CBETTING claim Coral Bonus from link.